TRIOPRESS – Automatic die-cutting machine with triple hot foil stamping
Jobs it can perform in a single pass:
- Hot foil stamping + hot foil stamping + hot foil stamping
- Hot foil stamping + hot foil stamping + hot embossing
- Hot foil stamping + hot foil stamping + die-cutting
- Hot foil stamping + hot embossing + die-cutting
- Hot embossing + hot embossing + hot embossing
TECHNICAL SPECIFICATIONS MACHINE DETAILS REQUEST INFORMATION
Technical specifications
Below you will find full details of the machine, with a complete overview of its functions, performance and key features, giving you a clear and immediate picture of its operating capabilities.
| Feature | Value |
|---|---|
| Maximum sheet | size1050 × 750 mm |
| Minimum sheet | size400 × 360 mm |
| Maximum cutting | size1040 × 720 mm |
| Maximum hot foil stamping size | 1040 × 720 mm |
| Maximum heating | size1040 × 720 mm |
| Minimum gripper margin | 9–17 mm |
| Minimum cut width | — / 10–18 mm |
| Inner chase size | 1123 × 760 mm |
| Substrate range | Board 80–2000 g/m², 0.1–2 mm Corrugated board ≤ 4 mm |
| Die-cutting accuracy | ≤ ±0.075 mm |
| Hot foil stamping accuracy (standard) | ≤ ±0.1 mm |
| Holographic stamping accuracy | ≤ ±0.1 mm |
| Heating accuracy | ≤ ±0.075 mm |
| Press 1 – max. cutting force | 600 T |
| Press 2 – max. cutting force | 600 T |
| Press 3 – max. cutting force | 600 T |
| Max. working speed | 6,200 sheets/hour |
| Max. feeder pile height (standard) | 1600 mm |
| Max. delivery pile height | 1400 mm |
| Max. foil roll diameter | Ø250 mm long., Ø200 mm transv. |
| Electric | heating system20 zones, 40–180 °C |
| Foil | width20–1020 mm |
| Press 1 – foil advance shafts | 3 long. + 2 transv. 4/5/6 long. + 2 transv. (opt.) |
| Press 2 – foil advance shafts | 3 long. + 2 transv. 4/5/6 long. + 2 transv. (opt.) |
| Press 3 – foil advance shafts | 3 long. + 2 transv. 4/5/6 long. + 2 transv. (opt.) |
| Press 3 functions | Electrical system + stripping (TTRC) |
| Total installed | power177 kW / 177 kW |
| Compressed | air requirements0.6–0.7 MPa, ≥ 1 m³/min |
| Machine size (with non-stop die pre-loader) | 10915 × 7424 × 2658 mm |
Advanced technical features
for optimal, high-performance operation
Feeder (4 suction and 6 blowing nozzles)
Sheet transport unit
Front lays and side lay
Toothed-belt drive, intermittent mechanism
Micro-adjustable chase with quick-positioning device
Micro-adjustable cutting plate
Servo-controlled gripper bar positioning device
Honeycomb plate with micro-adjustment
Stripping unit
Gripper-edge waste stripping device
Non-stop delivery with roller-blind rack
Electrical unit
German-made vacuum pump
Automatic lubrication system
Main drive cooling/lubrication mechanism
Request information
For any questions about the machine or to request a tailor-made quote, we are at your disposal. You can write to us using the form or use our contact details
Direct contacts
If you prefer immediate contact without filling out forms, our team is ready to answer you via phone, email or dedicated messaging.
You can choose the channel that is most convenient for you to receive quick assistance, details on the machinery.
Rely on our experts to get all the information you need, solve doubts or request direct advice. We are always available to guide you step by step and offer you a simple, clear and wait-free experience.
